7 min read

What Does OSHA Require for Warehouse Aisle and Floor Markings?

The actual OSHA sections, what they say, and how most facilities translate them into lines on the floor.

The standards that apply

  • 29 CFR 1910.22 — walking-working surfaces must be kept clean and orderly
  • 29 CFR 1910.176(a) — permanent aisles and passageways used by mechanical handling equipment shall be appropriately marked
  • 29 CFR 1910.144 — red for fire protection equipment and danger, yellow for caution
  • ANSI Z535 — broader safety color conventions many facilities follow

Aisle width

OSHA does not set a single aisle width number. The common industry practice is aisles at least 3 feet wider than the widest vehicle or load, and pedestrian walkways separated from forklift lanes.

Common color scheme

  • Yellow: aisles, traffic lanes and work cells
  • White: equipment, fixtures and racking
  • Red: fire equipment, defects, scrap
  • Blue/green: materials and components
  • Black/yellow stripes: areas that may expose workers to hazards
  • Red/white stripes: keep clear — panels, exits and eyewash stations

Before an inspection

Worn aisle lines are an easy observation for an OSHA compliance officer. A refresh before an audit is inexpensive insurance.

Where we work

Serving Providence, RI — and 50 miles out