Typical dimensions
Most commercial stalls in New England are 9 feet wide by 18 feet long. Some towns allow 8.5-foot stalls in employee lots, and many zoning codes allow compact stalls of about 8 by 16 feet for a percentage of the total.
The drive aisle depends on the parking angle. A 90-degree layout needs a two-way aisle of roughly 24 feet. Angled parking allows narrower one-way aisles.
Dimensions by parking angle
- 90° (perpendicular): 9' × 18' stall, 24' two-way aisle
- 60°: 9' × 18' stall, about 18' one-way aisle
- 45°: 9' × 18' stall, about 13'–15' one-way aisle
- Parallel: 8'–9' × 22'–24' stall
- Accessible car stall: 8' wide with a 5' access aisle
- Van-accessible stall: 11' wide with a 5' aisle, or 8' with an 8' aisle
Who decides in your town
Stall size is set by your city or town zoning ordinance, not by the state. Providence, Cranston, Warwick and most Massachusetts towns publish minimum stall and aisle sizes in their zoning code, usually in a section on off-street parking.
Accessible stall sizes are different: those come from the 2010 ADA Standards for Accessible Design and are the same everywhere in the country.
Getting more stalls from the same lot
Switching from 90° to angled parking in a narrow lot, standardizing inconsistent stall widths, and removing wasted hatched areas often gains 5 to 12 percent more spaces. That is why a measured layout is worth doing before re-striping an old lot.